State of the Network - April 2024

Lately I have been working some electronics projects, genealogy, and really haven’t had time to really work on my HomeLab.  Sensing that I haven’t posted for some time I thought I might post about the HomeLabs current condition.  While I am working on the electronics projects most of the equipment is turned off.  In fact, I normally have only the Edgerouter-12 and the Netgear M4100-26g turned on since my laptop is pretty much permanently connected to the Server Admin vlan. So here are some bullit points  to explain where the HomeLab sits:

• I now have a managed switch at the top of the rack to connect to the outside (powered on with the rack)
• I have pushed the two Edgerouter-X routers and one managed switch into the back of the rack with their ports coming out to the front
• I now have a 24 port patch panel that connects to some ports on the top 24 port patch panel, the two ER-Xs, the managed switch, and to the 5 input ports on the Proxmox server
• I can now power the xPod, Monitor Network, Proxmox server, some specific rack RPis, and the ER-12/M4100-26g separately
• The external managed switch behind the rack has been wired differently to accomodate the changes and additional experiments on the HomeLab table
• I now have two LED strips on the front of the rack to illuminate the patch wiring
• I also have two LED strips under my laptop holder on the HomeLab table to illuminate electronic circuits on the table
• I have incorporated an UAP-AC-AD to output four specific vlan connections; one of which goes to my development vlan

These are items that I have changed but I still have items that I haven’t implemented yet. My thoughts about what I want keep changing as I come up with other ideas.  So here are some future items that I want to implement:

• I recently obtained an Edgerouter-12P which will provide POE capability in the rack and beyond; I need to determine how I will use it
• I also obtained a couple of UAP-AP-LR WAPs which I hope to use to form a wi-fi link to the back bedroom (I am unable to get an Ethernet cable pulled from the living room to my back bedroom) because the Power adapters only give me 130 Mbps throughput.
• I hope to spin up two RPi Zero Ws at opposite ends of the Ethernet over power link to monitor failures
• I hope to spin up a RPi 4B in the living room as a PiHole to be the definition of connections within my network
• I hope to be able to use my SLATE router, connected to a 2.4 GHz wi-fi connection as a fall over from the FLINT router
• I also hope to figure out how to integrate Midi into my HomeLab including a new Zynthian Synthisizer on an RPi 3B+