Checking out the previous effort at a File Server on Proxmox

The LXC #101 was created some time ago (debian 12, turnkey fileserver, 18.0-1).  The last time it was used was in July and I am not sure if I had tried to integrate it with #106 NextCloud; I may have.  So from here it looks like there was a try, but I need to review what steps were taken to set it up.  Also what is the current setup of the Proxmox drives: 2@1TB and 2@4TB drives in the case.

Update: I was able to get it working again and this time as well as connect LXC #101 to Tailscale.  I was then able to pull up a Z drive on my laptop.  Now I can access this Z drive from anywhere.

Project #37 - Setup a File Server on Proxmox

 This is a case of the cart before the horse.  It occurs to me that I need a files server in the network.  I would buy a NAS to integrate, but short of that I am going to utilize my Proxmox server to create a File Server.  Fortunately, there is a Turnkey file server that I can utilize for this purpose.  So this project is to setup a file server using the Turnkey File Server template.  Of course, I need to get the drives setup correctly on Proxmox before I can begin this.

Moved the xPod connections back to my main switch

After thinking about it for a while, I was convinced that I needed to add the other Edgerouter-12p that I have which has a POE capability.  In order to do that, I will need to remove the 8 port switch and 2 ER-X routers which are on the shelf that I need for the ER-12p.  So that means that I will need to rearrange the xPod RPis to connect to the main switch and disconnect the 8 port switch and 2 ER-X routers.

Update: completed